Hotline
+49 9132 733400
Fax orders
+49 9132 733 401
Spartan-3 FPGA board with PCI interface: PCIS3BASE
A XILINX FPGA board with bus mastering PCI-interface, Spartan-3 FPGA, 32 MByte SDRAM and a 78-pin HD-SUB connector. A slot located between the FPGA and the HD-SUB connector allows plugging customer specific electronic boards. FPGA configuration is possible at any time without the need to reeboot the Computer (download-software with source source-code included).
|
 |
|---|
 |
A 50 MHz oscillator provides the basic clock for the FPGA and the local bus of the PCI-bridge. Optional, additional clocks can be provides by plug-in boards. One slot for plug-in boards is available. It is connected to the FPGA and to the HD-SUB connector by 100-pin connectors respectively. User-specific hardware-extensions as ADC's, DAC's, PHY's or other devices can be easily added this way. The busmaster PCI interface is implemeted using a dedicated device, the PLX PCI-9056. No PCI core is needed in your FPGA design. No detailed knowledge about the PCI-bus is needed to transfer data beween the FPGA and the user-software running on the PC. The example design coming with the board shows how to implement communication using the Wishbone interface
|
|---|
FPGA |
SPARTAN-3™ XC3S1500-4FG456C |
supported operating systems |
comes with UDK (Unified Development Kit) which is usable with Windows 7™, Windows XP™ and LINUX™. |
User I/O |
Expansion slot with two 100-pin connectors. Default plug-in board 'PIB64IO' provides 64 buffered 5 Volt compatible I/O lines. Organisation: 8 banks x 8 bit. 28 FPGA I/O pins availabe on internal expansion/debug connector (0,1" 2x17pin) |
Host Interface |
PCI-interface (Plug-and-Play). JTAG connector to plug Xilinx download-cable (not included) |
FPGA configuration options |
JTAG (Xilinx download cable) PCI Bus (comes with UDK software) |
Memory |
32 MByte SDRAM 4 Mbit SPI Flash |
Dimensions (LxWxH) |
according to PCI specifications 'short card' |
standard accessory |
PIB64IO plug-in-board mating 78-pin HD-SUB connector with backshell CD-ROM containing driver and Example software |
User's Manual |
see product matrix |
ordering information |
ordering No. C1010-3105 |
Miscellaneous |
To develop own FPGA designs, you need a Xilinx™ development system (not included). The SPARTAN-3 XC3S1500FG456C FPGA is supported by the free Xilinx software 'WebPack ISE'. More information can be found on www.xilinx.com CESYS develops, produces and delivers appropriate plug-in boards according to your specifiactions. Please call or send your requirements, to receive an offer. |
For further information on Cesys FPGA boards or if you have questions, please visit our FPGA-Forum, send an E-Mail or call us: +49 9132 733 400. |
|