USBV4F

C1030-4007

NEW!

This 120 x 100 mm sized Spartan-6LX FPGA-board can be used in standard cases or slots. 115 I/O signals with adjustable voltage level, two USB-Interfaces, 128 MByte of SDRAM and 16 MByte of Flash memory are available.

Some I/O signals are routed as impedanze-controlled pairs and can be used for signal standards like LVDS.

On request, the USBS6 board can be populated with SPARTAN-6LX FPGAs like LX25 or LX45 for OEM-quantities. Normally it comes with the LX16.

The UDK (Universal Development Kit) that comes with the board contains the code that is needed for a quick implementation of your own applications.

Amongst others, USB drivers for Windows™ (7/Vista/XP) and Linux™, sample applications for Labview™ and Python, VHDL source code of a sample application and a Test&Analyze tool UDK-LAB are included.

The USBS6 board can be powered by the USB 2.0 Host-interface. This fast USB connection enables long-term data-rates in excess of 30 MBytes per second. For this, an on-board Cypress FX-2 USB Controller in "slave-FIFO" mode is used. You can use this method in your own designs. The example code is part of the UDK that comes with the board.

In addition, the USBS6 has a a secondary USB Interface which allows data-rates of up to 3Mbs and is recognized as RS232 interface on the host computer. This channel is well suited to output debug information or as a very easy-to-use alternate to the main USB interface.

The FPGA configuration options include configuration from on-board SPI Flash memory. Therefore, the USBS6 board can be used without USB host connection. Soft-Prozessor applications are supported by an additional separate 128 Mb (16 MByte) Flash Memory. To buffer larger amounts of data a 1 Gb (128 MByte) low-power DDR SDRAM memory is available on board.

Some LEDS and a 16-way rotary switch are located in a way that alows to add a front panel or to use the board with an standard EURO-format housing (width: 100 mm).

scopeofdelivery

Memory	8 MByte SRAM memory (10 ns access time) 2 MByte Flash memory
Options	On request, this board is available with alternative assembly variants.
Interfaces	480 MBit USB 2.0 (Cypress FX-2) JTAG (for Xilinx download-cable)
Supported OS	The included software UDK (Unified Development Kit) is usable under Windows 7 ™ Windows XP ™ and Linux ™.
FPGA Configuration	Flash Memory (automatic configuration after power up) JTAG (Xilinx download-cable) USB (UDK software included)
User I/O	206 I/O signals and LVDS pairs on expansion connector. IO-levels: 3,3 Volt / 2,5 Volt / 1,8 Volt / user
Power supply	5 Volt DV bus-powered or self-powered
Dimensions	100 x 160 mm, EURO-Format
FPGA	XC4VLX25-10FFG668C
FPGA family	Virtex-4™