USB2FPGA

C1030-1202

not recommended for new designs

A XILINX ™ SPARTAN-II ™ FPGA board with USB 2.0 interface and 1 Mbyte of SRAM (15 ns accesstime). You can use it as a development platform or as an OEM board.

This sturdy classic is in use hundreds of times . Since the Spartan-II FPGA is 5 volt tolerant, this board is suited especially for "legacy" applications.

At the 96-pin VG connector of USB2FPGA the I/O pins of the FPGA and 3.3 V and GND are available.

Many extensions can be connected directly without any additional external power supply.

All pins of the FPGA can be connected on standard 0,1" headers.
There is no USB 2.0 core necessary for the FPGA as a USB 2.0 controller (CYPRESS FX-2) is present on the board.

The input clock frequency can be set via jumpers between 1 and 250 MHz.

This module is still available. For new projects, however, theUSBS6 board should be used.

Scope of supply:

USB2FPGA board
USB.cable (approx. 1,5m)
Device Driver, Documentation and Example-code on CD-ROM

block diagram

Supported OS	The supplied software is ceusb2 usable on Windows XP ™. The USB2FPGA board can NOT be used with the CESYS UDK.
Power supply	self-powered oder bus powered
Dimensions	100 x 120 mm
User I/O	81 FPGA I/O signals on VG-96 connector All FPGA pins are connected to standard 0,1" headers
FPGA	XILINX™ XC2S200-5PQ208C
FPGA Familie	Spartan-2™
Memory	1 MBYTE SRAM, 15ns
Interfaces	USB 2.0 Interface (Plug-and-Play) The JTAG signals can be picked up at headers, but not combined on a separate connector.